ACDELCO
More Information for ACDELCO 18R2571
Continue Shopping
 
ACDELCO 18R2571close
<
>
Part image
ACDELCO 18R2571 Specifications
Bleeder Thread DiameterM10x1
Caliper Casting MaterialAluminum
Caliper ColorNatural
Caliper Slides IncludedYes
Caliper TypeFloating
Casting MaterialAluminum
FinishPlain
Friction MaterialCeramic
Friction Material CompositionCeramic
Height (IN)7.05
Inlet Fitting TypeFemale
Inlet Thread Diameter (IN)0.394
Inlet Thread Diameter (MM)10
Length (IN)9.69
Mounting Bolt Thread Pitch (MM)1.750
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Mounting Hole Diameter (IN)12
Pad Wear Sensor IncludedYes
Pads IncludedYes
Piston 1 Diameter (IN)1.8
Piston 1 Diameter (MM)45.7
Weight (lb)0.03
Width (IN)7.12
Gold / Professional; Reman.; Includes Ceramic Pads
ACDelco Gold (Professional) Reman Loaded Calipers come with brake pads already attached – no assembly is required. These premium aftermarket reman loaded disc brake calipers will provide the same performance, durability, and service life you expect from ACDelco.

Features:
  • Pressure tested to ensure safe and confident braking
  • Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Pre-lubed and loaded with quality friction pads for smooth operation
  • Includes bleeder screws, copper sealing washers, hardware, and mounting brackets (where applicable) for easy installation
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

OEM / Interchange Numbers: 19285412

Warranty Information:
24 Month / Unlimited Mile Warranty
Warranty Details