DURAGO
More Information for DURAGO BR5509802
{Alternate Inventory Numbers: BR55098-02}
Continue Shopping
 
DURAGO BR5509802  
$32.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$32.79
Total
DURAGO BR5509802close
<
>
Part image
Sold Individually
DURAGO BR5509802 Specifications
Abs Tone Ring IncludedNo
Center Hole Diameter (IN)2.79
Center Hole Diameter (MM)70.8
ConstructionFull Cast
Conventional Or Drum-In-Hat Type RotorDrum-in-Hat
Cross DrilledNo
Directional or Non-Directional Brake SurfaceNon-Directional
Discard Thickness (IN)0.94
Discard Thickness (MM)24
MaterialCast Iron
Mounting Bolt Hole Circle Diameter (IN)4.53
Mounting Bolt Hole Circle Diameter (MM)115
Mounting Bolt Hole Diameter (IN)0.51
Mounting Bolt Hole Diameter (MM)13
Mounting Bolt Hole Quantity5
Nominal Thickness (IN)1.02
Nominal Thickness (MM)26
Outside Diameter (IN)11.73
Outside Diameter (MM)298
Overall Height (IN)1.89
Overall Height (MM)48.1
Rust Resistant CoatingYes
SlottedNo
Solid Or Vented Type RotorVented
Electrophoretic Coated
DuraGo Electrophoretic Coated Brake Rotors offer dynamic performance with the utmost in corrosion resistance.

Features:

  • Electrophoretic Coating utilizes a form of electroplating to apply a rust resistant coating directly to the rotor resulting in a highly corrosion-resistant finish
  • Premium Core Technology allows for tighter tolerances and cleaner castings. With this process, non-machined areas of the rotors are more detailed
  • Machine Balanced for smooth braking
  • Multiple Vane configurations for heat dissipation
  • Non-Directional Swirl Finish promotes brake pad bedding and eliminates the need for machining prior to installation
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Videos

Information About Electrophoretic Coating


DURAGO Warranty Information:
12 months/12,000 miles