Centric OE Pack Brake Kits are intended for drivers seeking premium direct-replacement parts that offer low dust, low noise, improved service life and improved braking performance. Each kit contains Centric's Black or High Carbon Alloy rotors and Posi Quiet pads.
Features & Benefits:
Rotors feature a double disc ground, taper free finish which eliminates run out and provides near perfect disc thickness variation (DTV)
Symmetric rotor vane casting provides proper heat transfer and thermal efficiency, resulting in superior braking power and safety
Pads are 100% shimmed to eliminate noise and vibration
Pads provide stable friction performance across a wide temperature range
Hardware included, where applicable
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips
