CENTRIC
More Information for CENTRIC 50010640
{Alternate Inventory Numbers: 500.10640}
Continue Shopping
 
CENTRIC 50010640  
$55.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$55.79
Total
(Only 1 Remaining)
CENTRIC 50010640close
<
>
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 50010640 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionSemi-Metallic
Inner Pad Height (IN)3.142
Inner Pad Height (MM)79.800
Inner Pad Width (IN)11.339
Inner Pad Width (MM)288.000
Mounting Hardware IncludedYes
Notes4 Pads with 1 Wear Sensor / Clip
Outer Pad Height (IN)3.142
Outer Pad Height (MM)79.800
Outer Pad Width (IN)11.339
Outer Pad Width (MM)288.000
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
PQ PRO; Includes Hardware
Centric PQ (Posi Quiet) PRO brake pads have been developed to address key issues such as brake fade, weak braking response, and excessive noise that many pads face when paired with rotors coated with anti-corrosion compounds. PQ PRO brake pads quickly and efficiently remove the rotor coating without damaging the rotor braking surface underneath while preparing the rotor surface to accept the delivery of the crucial friction transfer film layer required to optimize your braking experience.

Features & Benefits:
  • Application-specific friction compounds are engineered to exceed original performance specifications, ensuring reliable stopping power
  • Advanced multi-layer shims are employed to eliminate noise
  • Pads are enhanced with a Mu500 friction coating that provides an immediate increase in Mu (stopping power) right out of the box and eliminates time consuming break-in procedures
  • Ultra-low dust formulas are used to ensure clean wheels
  • Designed specifically to be used with coated rotors
Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Videos

Product Highlight: Centric PQ Pro Brake Pads


Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles