By fixing and improving components regularly, Blue Streak Electronics knows which are the most vulnerable parts that need improvement. Their line of remanufactured Mass Air Flow Sensors provides OE-quality product to customers who demand it.

• 100% Computerized Testing for all Modules and Sensors using advanced test equipment.
• Latest OEM calibrations installed in all programmable modules.
• Common component failures are 100% replaced.
• Complete board reflow to ensure reliable performance.
• Upgraded components used to improve circuit reliability and performance.
• Trilingual installation instructions.

Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

• Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
• Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
• Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
• Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
• Cracked Intake Boot (found in the "Engine" category)

Videos

Additional Resources