AGILITY 8013027
|
|
$154.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$154.79
Total
|
|
|
|
AGILITY 8013027 Specifications |
---|
Construction | Plastic Tank Aluminum | Core Height | 17.750 IN | Core Row Quantity | 2 | Core Thickness | 1.625 in | Core Width | 25.125 IN | Inlet Diameter | 2.000 in | Outlet Diameter | 1.375 in | Transmission Oil Cooler Length | 10.000 in |
|
|
Automotive Parts Distribution International (APDI), an Agility Auto Parts company, produces automotive cooling products with a focus on high quality standards in the heating and cooling parts market.
Features & Benefits
- Engineered and manufactured under ISO TS16949 quality system
- 100% Leak Tested
- Ready to install out of the box
- Design features like the reinforced B-Tube for better rigidity, reduced chance of leaks
- Aluminum oil coolers for increased heat transfer to improve oil cooler efficiency
- Plastic tanks are cast with ribbing inside or out for added strength
Service Tip: If you are experiencing unexplained or reoccurring radiator core leaks, or notice dark spots on your failed radiator core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed radiator to prevent repeat failure.
APDI's Testing Process
APDI's products are validated through a series of tests which are all completed in-house in their testing lab.
- Thermal Cycle Testing - Verify radiators ability to withstand the effects of thermostat opening in cold ambient conditions
- Pressure Cycle Testing - Demonstrates robustness to concurrent pressure cycling and vibration
- Salt Water Acidified Acceleration (SWAAT) - Measures corrosion resistance
- Heat Transfer Testing - Validates radiator efficiency
- Leak Test - Identify any coolant circuit leaks
- Burst Pressure Test - Determines the maximum internal pressure before fin collapse and leakage occurs
Measurement Guide
![](/Images/MoreInfo/install.png) Cooling System Maintenance | Tips & Tools Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
- Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
- Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
- Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
![](/Images/MoreInfo/doc.png) Additional Resources How to Measure a Radiator
Attention California Customers - Not Applicable
|
OEM / Interchange Numbers: 2215000503, 2215002603, 2215003203, 995003303 |
|