|
GATES G252400810
|
|
$34.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$34.79
Total
|
|
|
|
|
|
| GATES G252400810 Specifications |
|---|
| Bent Tube Angle | 90 | | Bulkhead | No | | Coupling Description | MegaCrimp Female Flat-Face O-Ring Swivel - 90 Bent Tube | | Cut Off (IN) - C | 2.19 | | Cut Off (MM) - C | 55.7 | | Drop (IN) - T | 1.85 | | Drop (MM) - T | 47 | | Gender | Female | | Hose Inside Diameter (IN) | .5 | | Hose Inside Diameter (MM) | 12.7 | | Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose | | Length (IN) - L | 3.67 | | Length (MM) - L | 93.2 | | Nut Hex (MM) - H2 | 30 | | O-Ring Location | Flat Face O-Ring | | Seal Type | O-Ring | | Swivel | Yes | | Thread Size | 1-14 |
|
|
| Female Flat-Face O-Ring Swivel - 90 Bent Tube (MegaCrimp) |
Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection. - Robust bite-the-wire crimp
- Low profile
- Full-stem insertion
- Full-length crimp
- Tested to industry-leading 600,000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard
|
|
