|
GATES G255020607
|
|
$22.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$22.79
Total
|
|
|
|
|
|
| GATES G255020607 Specifications |
|---|
| Bent Tube Angle | 45 | | Coupling Description | MegaCrimp SAE Male Inverted Swivel - 45 Bent Tube | | Cut Off (IN) - C | 2.29 | | Cut Off (MM) - C | 58.1 | | Drop (IN) - T | 1 | | Drop (MM) - T | 25.4 | | Gender | Male | | Hose Inside Diameter (IN) | .375 | | Hose Inside Diameter (MM) | 9.5 | | Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose | | Length (IN) - L | 3.39 | | Length (MM) - L | 86 | | Mating Angle | 45 | | Nose Seat | Inverted | | Nut Hex (IN) - H2 | .6875 | | Seal Type | Mated Angle | | Swivel | Yes | | Thread Size | 11/16-18 |
|
|
| SAE Male Inverted Swivel - 45 Bent Tube (MegaCrimp) |
Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection. - Robust bite-the-wire crimp
- Low profile
- Full-stem insertion
- Full-length crimp
- Tested to industry-leading 600,000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard
|
|
