|
GATES G255201212
|
|
$39.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$39.79
Total
|
|
|
(Only 1 Remaining)
|
|
|
| GATES G255201212 Specifications |
|---|
| Coupling Description | MegaCrimp North American Stand Pipe | | Cut Off (IN) - C | 1.57 | | Cut Off (MM) - C | 40 | | Hose Inside Diameter (IN) | .75 | | Hose Inside Diameter (MM) | 19.1 | | Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose | | Length (IN) - L | 3.58 | | Length (MM) - L | 91 | | Nose Seat | Inverted | | Seal Type | Mated Angle | | Stem Hex (IN) - H1 | 1.063 | | Swivel | No | | Tube Length (IN) - B | 1.16 | | Tube Length (MM) - B | 29.5 | | Tube Outside Diameter (IN) - A1 | .75 |
|
|
| North American Stand Pipe (MegaCrimp) |
Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection. - Robust bite-the-wire crimp
- Low profile
- Full-stem insertion
- Full-length crimp
- Tested to industry-leading 600,000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard
See accessories for individual sleeves and nuts.
|
|
