|
CENTRIC 30714040
|
|
$47.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$47.79
Total
|
|
|
|
|
|
| Brake Pads are sold as a set. Quantity of one (1) is for both wheels |
| CENTRIC 30714040 Specifications |
|---|
| Friction Material Bonding Type | Integrally Molded | | Friction Material Composition | Semi-Metallic | | Inner Pad Height (IN) | 2.618 | | Inner Pad Height (MM) | 66.500 | | Inner Pad Width (IN) | 5.591 | | Inner Pad Width (MM) | 142.000 | | Mounting Hardware Included | Yes | | Notes | 2 Pads with 1 Wear Sensor / Clip | | Outer Pad Height (IN) | 2.618 | | Outer Pad Height (MM) | 66.500 | | Outer Pad Width (IN) | 5.591 | | Outer Pad Width (MM) | 142.000 | | Pad Quantity | 4 | | Pad Shims Included | Yes | | Pad Wear Sensor Included | Yes | | Prepared For Pad Wear Sensor | Yes |
|
|
| Posi Quiet XT Police; Includes Hardware |
Lab developed and engineered specifically for police cars, Tactical Brake Pads by Centric provide extended service life and fade-free performance under the most grueling conditions. Specially formulated friction compounds are designed to eliminate fade in high-speed pursuit situations and work silently when stealth is critical.
Features:
- OE style slots promot pad out-gassing, increasing thermal capacity and reducing noise
- OE style chamfers provide maximum noise reduction
- Police-specific friction compounds are positive molded for safe & reliable stopping performance for the entire life of the pad
- NRS backing plates provide maximum pad retention under extreme use
- Mechanically attached multi-layer pad shims eliminate noise
- Mu500 increases initial pad bite and immediately achieves optimum coefficient of friction right out of the box
 Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - https://www.p65warnings.ca.gov/
Attention California Customers - WARNING: Cancer and Reproductive Harm
|
CENTRIC Warranty Information:90 days/3,000 miles |
|
