More Information for FVP 1306080
{Alternate Inventory Numbers: 130-6080}
Continue Shopping
FVP 1306080  
+ Sold in packs of 1x1
(Only 1 Remaining)
FVP 1306080close
Part image
FVP 1306080 Specifications
Gaskets IncludedYes
MaterialCast Iron
Package Contents2 Paper Gaskets, 2 Bolts, 1 Bracket, 1 Plug (Pre-Installed)
Pulley IncludedNo
Features & Benefits:
  • Designed to match OE coolant flow rate and pressure
  • Bearing noise and durability tested
  • All required hardware included for installation
  • 100% factory tested for leakage and dimensional precision
  • 100% new construction
Every belt driven water pump has a weep hole that might leak a little in the beginning. Some seepage from the weep hole is normal during the break-in period (about 10 minutes), and does not indicate a defect.
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
OEM / Interchange Numbers: 10140667, 12512740, 12512741, 12520263, 12525125, 12529192, 12551474, 19168608

Warranty Information:
Limited Lifetime