Brake Pads are sold as a set. Quantity of one (1) is for both wheels
ACDELCO 17D1282MH Specifications
Abutment Clips Included
No
Adhesive Backed Pad Shim
No
Brake Lubricant Included
No
Chamfered Edges
Yes
FMSI Number
D1282-8398
Friction Material Attachment
Bonded
Friction Material Composition
Metallic
Inner Pad Height (IN)
2.200
Inner Pad Overall Thickness (IN)
0.720
Inner Pad Overall Thickness (MM)
18.29
Inner Pad Width (IN)
5.260
Mounting Hardware Included
No
Outer Pad Height (IN)
2.200
Outer Pad Overall Thickness (IN)
0.720
Outer Pad Overall Thickness (MM)
18.29
Outer Pad Width (IN)
5.260
Pad Shim Color
Black
Pad Shims Included
Yes
Pad Wear Sensor Included
No
Pad Wear Sensor Type
Electronic
Prepared For Pad Wear Sensor
No
Slotted
No
Gold / Professional; Semi-Metallic; w/Hardware
Features & Benefits:
Formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering premium braking power
Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Ready to be installed right out of the box – no curing required
Tested to SAE J2784 for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing for quality
Friction material is integrally molded to the backing plate for bond integrity
Stamped backing plate allows for proper pad movement within the caliper assembly, helping to minimize noise, brake pulsation, and helping to protect against premature wear
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips