|
ENGINETECH S593V
|
|
($0.76/Each)
Price
|
$0.00
Core
|
+ Sold in packs of 25x25
Pack
|
$19.00
Total
|
|
|
|
|
|
| ENGINETECH S593V Specifications |
|---|
| Guide Outer Diameter | 0.501 IN | | Inner Diameter Ribs | 3 | | Inside Diameter | 0.486 IN | | Material | Viton | | Outside Diameter | 1.120 in | | Seal Length | 0.633 in | | Seal Type | Positive-Tophat | | Valve Stem Size | 7.00 MM |
|
|
Enginetech's high quality valve stem seals are available in three categories, Premium Positive, Premium Umbrella and OE.
Enginetech Premium Positive seals are metal clad with high-temp Viton® elastomer sealing lips. All Premium Positive seals are designed to work with valve stems from 0.005" under to 0.015" over. Most of these seals can be used as a universal fit on normal guide sizes such as 0.482", 0.500", 0.512", 0.530", 0.562, 0.625" etc. Stem diameters range from 8.00mm to 3/8".
Enginetech Premium Umbrella seals are high-temp Silicone with garter springs to retain stem interference. All Premium Umbrella seals are designed to work with valve stems from 0.005" under to 0.015" over. Most of these seals can be used as a universal fit on normal stem sizes such as 8.00mm, 5/16, 11/32" and 3/8".
Enginetech OE type seals are designed as a direct replacement for the OE part. The OE type seals are recommended for standard OE diameter valve stems only. We use only OE type materials for these seals including Viton©, polyacrylate and nylon. While many competitors use low quality nitrile materials Enginetech uses only OE material or better. We've got you covered with a full line of seals for your rebuilding requirements.
Why choose Enginetech Valve Stem Seals?
|
ENGINETECH Warranty Information:Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No WarrantyWarranty Details |
|
