|
GATES 370640
|
|
($79.99/Each)
Price
|
$0.00
Core
|
+ Sold in packs of 50x50
Pack
|
$3,999.50
Total
|
|
|
|
|
|
| GATES 370640 Specifications |
|---|
| Coupling Recommendation | GlobalSpiral MAX | | Cover Color | Black | | Cover Material | Synthetic Rubber - Polychloroprene - Type A - Color Coded Layline | | Cover Type | Type A - Oil Resistant | | Dash Size | 24 | | End 1 Diameter (IN) | .375 | | End 1 Type | Male Inverted Flare | | Hose Inside Diameter (IN) | 1.5 | | Hose Outside Diameter (IN) | 2.26 | | Hose Pressure Description | Extremely High Pressure | | Length | 114.625" | | Maximum Working Pressure (psi) | 5000 | | Minimum Bend Radius (IN) | 10 | | Minimum Burst Pressure (psi) | 20000 | | Product Type | EFG5KL Low Temp Spiral Wire Hose | | Reinforcement | Four Alternating Layers of Spiraled, High-Tensile Wire | | Temperature Range | -70 Deg. F to +212 Deg. F (-57 Deg. C to +100 Deg. C) | | Tube Description | Black, Oil-Resistant, Synthetic Rubber | | Tube Material | Nitrile - Type C | | Type | Hydraulic Hose |
|
|
| EFG5KL Low Temp Spiral Wire Hose; Black Cover; 1.5" Inner Diameter |
Gates extensive field examination and testing assure proper fit. Designed for passenger cars and light trucks. General instructions are packed with every assembly.
Features:- Where pictured, comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets.
- Exceeds SAE J2050 performance requirements.
 Installation Tips - Replace all power steering hoses at the same time, to prevent system contamination
- Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
- Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
- Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
|
| OEM / Interchange Numbers: F3TZ3A713G, F4TZ3A713H |
|
