The difference between the checkered flag and 2nd place is measured in milliseconds. While there are many ways to shave time off your fastest lap, a brake upgrade is one of the best. For weekend track days and High Performance Driving Events, Power Stop's Track Day brake kit can take the heat. As the official brake supplier of Bondurant Racing School, Track Day brake pads are data driven and tested to provide extreme fade resistance, low thermal conductivity, and consistent pedal feel. Whether you're a seasoned pro or just getting some weekend time on the grid, have confidence and control at every corner with PowerStop Track Day.
Features & Benefits:
Carbon-Fiber/Metallic pad formulation for extreme fade resistance at high speeds
High coefficient of friction when cold, even higher when hot
Rotors are precision machined and mill balanced for vibration-free braking
Very consistent and stable modulation
Superior pedal feel
Bolt-On Ready - No modifications needed to your Vehicle
Abutment Clips, Tension Clips, and Pin Bushings included where applicable
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide, which are known to the State of California to cause cancer, and Arsenic and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Installation Tips
Videos
