|
NUGEON 9917364A
|
|
$59.89
Price
|
$60.00
Core
|
+ Sold in packs of 1x1
Pack
|
$119.89
Total
|
|
|
|
|
|
| NUGEON 9917364A Specifications |
|---|
| Anti-Squeal Shims Included | No | | Bleeder Screw Cap Included | No | | Bleeder Screw Included | Yes | | Bleeder Screw Thread (MM) | M10-1.0 x 35 | | Bleeder Thread Size | M10-1.0 | | Bracket Cast Numbers | 4103 | | Bracket Included | Yes | | Bracket Mounting Bolts Included | No | | Caliper And Pad Hardware Included | No | | Caliper Casting Material | Cast Iron | | Caliper Color | Gray | | Caliper Finish | Rust Preventative | | Caliper Slides Included | Yes | | Dust Boots Included | Yes | | Hardware Included | Yes | | Inlet Fitting Type | Banjo Bolt | | Inlet Port Thread Size (MM) | M10-1.5 x 24.81 | | Inlet Thread Size | M10-1.5 | | New Or Remanufactured | Remanufactured | | Pads Included | No | | Piston 1 Outside Diameter (in) | 2 | | Piston 1 Outside Diameter (mm) | 41 | | Piston Material | Steel | | Piston Quantity | 1 | | Wear Sensors Included | No |
|
|
Only the best cores, without wear, corrosion or blemishes are selected for the NuGeon line. All components used are of the highest quality and every unit is pressure-tested with the same machines and parameters that are used at O.E.M. factories.
Features & Benefits:
- End-of-line pressure testing for leakage
- Piston replacement with same piston material as O.E. (phenolic/aluminum)
- Semi-loaded for end-user's choice of brake pad design and/or brand
- Pad hardware and brackets included in box
- Slider pins come pre-greased ensuring proper caliper movement and brake system stability
- New pin boots reduce the chance that moisture and contaminates will cause corrosion
- All rubber components are replaced assuring brakes perform at an optimal level
- Banjo bolts and copper crush washers provided (where applicable) to assure proper seat on the brake inlet and caliper housing
- New bleed screws ensure an airtight seal
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Attention California Customers - WARNING: Cancer and Reproductive Harm
Attention California Customers - Y
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).NUGEON Regular Inventory Warranty Information:Limited Lifetime |
|
