CENTRIC
More Information for CENTRIC 10613330
{Alternate Inventory Numbers: 106-13330, 106.13330}
Continue Shopping
 
CENTRIC 10613330  
$53.79
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $53.79
Total
Add to Cart
CENTRIC 10613330close
<
>
Part image
Image is of a typical part(s); part appearance varies by application.
Pads & Shoes are sold as sets. Quantity of one (1) is for both wheels.
CENTRIC 10613330 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionSemi-Metallic
Inner Pad Height (IN)2.465
Inner Pad Height (MM)62.600
Inner Pad Width (IN)6.988
Inner Pad Width (MM)177.500
Mounting Hardware IncludedYes
Notes4 Pads with 1 Wear Sensor / Clip
Outer Pad Height (IN)2.465
Outer Pad Height (MM)62.600
Outer Pad Width (IN)6.988
Outer Pad Width (MM)177.500
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
Posi-Quiet Extended Wear; Semi-Metallic; Includes Hardware
Posi Quiet Extended Wear Brake Pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. With these pads, you will experience excellent braking performance coupled with the assurance that your brakes will last for many miles.

Features & Benefits:
  • Long wearing Semi-Metallic friction formula
  • Stable friction performance across a wide temperature range, particularly high temperatures
  • Post cured for consistent performance throughout the service life of the brake pad
  • Low brake rotor wear
  • 100% scorched for easy bed-in
  • 100% shimmed to minimize noise and vibration
  • Positive Molded for even wear characteristics
  • Hardware included, where applicable
  • 100% Asbestos-free formulas
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life
Organic
 $ Dust CloudDust CloudDust Cloud Speaker IconSpeaker Icon Stop Sign Hourglass Icon
Semi-Metallic
 $$ Dust CloudDust Cloud Speaker IconSpeaker IconSpeaker Icon Stop SignStop SignStop Sign Hourglass IconHourglass Icon
Ceramic
 $$$ Dust Cloud Speaker Icon Stop SignStop Sign Hourglass IconHourglass IconHourglass Icon
Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles