SBI
Plus d'informations pour SBI 2302028
Continuer les achats
 
SBI 2302028  
En rupture de stock
Prix
Dépôt de reprise
Conditionnement
Total
SBI 2302028close
Part image

If an Overhead Cam Cylinder Head has been excessively machined the distance between the Cam and the Crank centerline is too small. This will affect the valve timing and the engine will not run properly. There is also a very good chance that the engine will not pass emissions tests. SBI Head Saver Shims are designed to replace this lost height and restore the centerline distance. These Shims are 0.020” thick and are made from steel. They should be installed on the block surface directly under the Head Gasket. Overhead Valve Cylinder Heads are also good candidates for shims. Surface machining reduces combustion chamber size boosting the compression ratio and potential for gasket failure. On V6 and V8 OHV heads, thinner heads can cause intake manifold misalignment. The Head Saver Shim corrects this.


SBI Informations sur la garantie:
12 mois pour les défauts substantiels de matériaux ou de fabrication