|
DELPHI TA2310
|
|
$13.36
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$13.36
Total
|
|
|
|
|
|
| DELPHI TA2310 Specifications |
|---|
| Adjustable | No | | Bearing Material | Plastic | | Color | Gray | | Dust Boot | Yes | | Dust Boot Material | Choloroprene Rubber (CR) | | End 1 Gender | Male | | End 1 Thread Diameter IN | 0.875 | | End 1 Thread Direction | Clockwise (Right) | | End 1 Threads Per Inch | 18 | | End 2 Gender | Male | | End 2 Thread Diameter IN | 0.563 | | End 2 Thread Direction | Clockwise (Right) | | End 2 Threads Per Inch | 18 | | Finish | Coated | | Grade | Standard | | Greasable | Yes | | Grease Fitting Included | Yes | | Height (MM) | 105.0 | | Housing Material | High Strength Steel | | Length (MM) | 154.0 | | Length Stud Center to End (mm) | 131.6 | | Length Stud Center to End IN | 5.181 | | Mounting Hardware Included | Yes | | Position(s) | Left Inner | | Pre Greased | Yes | | Stud Type | Threaded | | Tie Rod Material | Steel | | Type | BENT | | Weight (lb) | 1.41 | | Width (MM) | 44.5 |
|
|
Features:- Extensive dimensional and material analysis to ensure the very best compatibility to the Original Equipment (OE) part
- Tested alongside the OE part for 250,000 cycles to check braking force, cornering force and suspension travel movement, to ensure the part performs like the OE
- Able to withstand temperatures below -40ºC and over 120ºC, helping to ensure they perform even under the harshest conditions
- Parts exposed to 720 hours of salt spray for optimum protection against corrosion
- Additional cataphoretic coating for greater protection against corrosion and enhanced aesthetics
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
| OEM / Interchange Numbers: D2TZ3A130B |
Warranty Information:Limited Lifetime |
|
