STANDARD MOTOR PRODUCTS RU571T
|
|
$23.79
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$23.79
Total
|
|
|
|
Especificaciones de STANDARD MOTOR PRODUCTS RU571T |
---|
Método de fijación | Directo | Género de Conector | Macho; Hembra | Conector Cantidad | 2 | Forma del Conector | rectangular | Hardware incluido | No | Abrazadera de Montaje(s) Incluido | No | Número de Conector Cavidades | 2 | Número de velocidades | 3-5 Velocidades | Género de Terminal | Hembra; Macho | Cantidad de Terminales | 9 | Tipo de terminal | Hoja | Alambre Cantidad | 2 | Arnés de Cableado Incluido | Sí |
|
|
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your market needs. The Standard T-Series is a fit whenever a commercially acceptable product is called for.
Features & Benefits:- Direct-fit replacement for ease of installation
- High-quality materials ensure durability
- Tested for performance and reliability
- As a global manufacturer, they maintain complete quality control throughout the manufacturing process
Two or Four Mounting Holes? Standard® RU571T and RU371T are used on the same vehicles, with respect to year, make and model. To make things more complex, the Standard® RU571T requires the original resistor mounting plate be discarded and the replacement unit bolt directly to the blower case. The GM replacement resistor is not the same as the OE part. Use the information below to help decide which resistor each vehicle requires.
Standard® RU571T (GM 89019088)- Discard the existing mounting plate to install the replacement unit
- Mount this resistor directly to the blower case
- This resistor has 4 mounting holes
- In most cases, vehicles without a console will use the RU571T
Standard® RU371T (GM 89019089)- This resistor mounts with no modifications
- It has 2 mounting holes
- In most cases, vehicles with a console will use the RU371T
Replace the Connector:
GM Technical Service Bulletin 05-01-38-012C concerns the failure of the OE blower motor resistor and the subsequent damage to the vehicle harness connector. This TSB recommends replacement of the vehicle harness pigtail when replacing the blower motor resistor. SMP offers this replacement pigtail as Standard® S916.
¿Es el Motor de Ventilador o Módulo de Control/Resistencia de Motor de Ventilador? El Módulo de Control / Resistencia de Motor de Ventilador controla el Velocidad de Ventilador del Motor de Ventilador. Cuando falla, puede hacer que el Motor de Ventilador deje de funcionar y puede causar confusión sobre qué parte está defectuosa.
Motor de Ventilador |
Signos de Falla:- Flujo de Aire débil de los Respiraderos
- Ruidos o Vibraciones Inusuales Cuando se Enciende el Ventilador
|
Módulo de Control / Resistencia de Motor de Ventilador |
Signos de Falla:- No Hay Flujo de Aire de los Respiraderos
- Sopla aire a una sola velocidad
|
|
Fabricante Original de Equipo / Números de Intercambio: 22807123, 89018308, 89018596, 89019088 |
|