CENTRIC 90833501
|
|
$48.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$48.79
Total
|
|
|
|
CENTRIC 90833501 Specifications |
---|
Brake Pad Construction | Positively Molded With Shims | Brake Pad Material | Proprietary Formula | Electronic Wear Sensor | No | Rotor Finish | Natural | Rotor Material | Iron |
|
|
Centric Select Axle Packs are intended for drivers who want a simple solution for quality, direct-fit replacement brake components. Each kit contains pre-matched, direct-fit brake pad and rotor pairings designed to simplify brake replacement.
Features & Benefits:
- Rotors feature a non-directional finish and machined non-friction surfaces
- Pads are shimmed to eliminate noise and vibration
Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - California Proposition 65
|
CENTRIC Warranty Information:90 days/3,000 miles |
|