Features

• Pads are formulated with steel strands to provide strength and conduct heat away from the rotor’s surface to ensure effective braking during periods of frequent, aggressive stopping
• Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
• Calipers are pressure tested to ensure safe and confident braking
• Pre-lubed and loaded with quality friction pads for smooth operation
• Includes bleeder screws, copper sealing washers, hardware, and mounting brackets for easy installation

Installation Tips

• Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
• Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
• Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
• Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
• After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
• After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid