FRAM
More Information for FRAM TG10415
Continue Shopping
 
FRAM TG10415  
$11.52
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$11.52
Total
FRAM TG10415close
Part image
FRAM TG10415 Specifications
Anti-Drain Back ValveNo
Bypass Relief ValveNo
Filter Media MaterialCellulose/Synthetic Blend
Filter TypeCartridge
Height (IN)4.117
Housing ColorNA
Inside Diameter Bottom (IN)1.675
Non Slip GripNo
O-Ring Inside Diameter (in)3.467
O-Ring Outside Diameter (in)3.625
O-Ring Thickness (in)0.158
O-rings includedYes
Outer Diameter Bottom (IN)3.211
Outer Diameter Top (IN)3.211
Replaceable FilterYes
ReusableNo
Top Inside Diameter (IN)1.675
Torque NutNo
WashableNo
Tough Guard; Cartridge Filter
With 15,000 miles of protection, Tough Guard is the ideal filter for drivers who have high mileage vehicles or push their vehicles in stop-and-go traffic, towing and extreme weather conditions. FRAM's re-engineered Synthetic-Blend filter media provides premium engine protection for your vehicle.

Features & Benefits:
  • Stronger, more durable media provides an outstanding 99% dirt-trapping efficiency.
  • Synthetic fiber/cellulose blend increases dirt-trapping and dirt-holding capacity for higher levels of engine protection and longer filter life.
  • Microscopic synthetic fibers create small windows that trap dirt particles without affecting oil flow.
Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
3,000 - 5,000 Miles        
Standard Replacement
OEM Recommended    
High Performance / Heavy Duty
OEM Recommended

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: 30750013, LR001419

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details