RICHMOND D60R
|
|
$261.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$261.79
Total
|
|
(Gear Ratio: 4.10 Gear Ratio)
|
|
RICHMOND D60R Specifications |
---|
Cover Bolt Quantity | 10 | Differential Carrier Break | 4.10 Ratio and Lower | Differential Case Design Type | Dana 60 Reverse | Pinion Gear Tooth Quantity | 10 | Pinion Shaft Diameter (IN) | 1.626 | Pinion Spline Count | 29 | Ring & Pinion Gear Ratio | 4.10 | Ring Gear Bolt Quantity | 12 | Ring Gear Diameter (IN) | 9.75 | Ring Gear Material | 8620 Steel | Ring Gear Rotation | Reverse | Ring Gear Tooth Quantity | 41 |
|
|
Excel's broad line of original equipment automotive and light truck/SUV replacement ring and pinions offer Richmond's high OEM quality at affordable prices.
Features & Benefits:- EXCel gears are made from reclaimed 8620 steel for strength and durability
- Featuring easier installation and setup
- Central contact pattern on ring & pinions for longer lasting gear sets
- Computer controlled heat treating for increased durability
Differential Identification Guide
To order the correct ring & pinion, it's crucial to know the differential type and gear ratio on your vehicle.- First, determine your Differential Type.
- Next, determine the gear ratio on your vehicle using one of the following methods:
- Count The Teeth: Divide the number of teeth on the ring gear (big gear) by the number of teeth on the pinion gear (small gear). If you have 37 teeth on your ring gear and 12 teeth on your pinion gear, you have a 3.08 Gear Ratio (37 ÷ 12 = 3.08).
- Verify Through A Dealer: Verify the ratio using your VIN number. This will only be accurate if the differential has not been previously modified.
Additional Resources Installation Instructions
Attention California Customers - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
OEM / Interchange Numbers: 7074752X |
RICHMOND Warranty Information:12 Months |
|