GATES 5VX540
|
|
$31.89
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$31.89
Total
|
|
|
|
GATES 5VX540 Specifications |
---|
Belt Material | Ethylene Elastomer (EE) | Construction | Notched | Cord Material | Polyester | Cross Section Designation | 5VX | Notched | Yes | Number of Strands | 1 | Outside Circumference | 54" | Top Width | .62" | Type | Narrow Section Molded Notch V-Belt |
|
|
Super HC Molded Notch; 5V 5/8" x 54" |
Recommended for use on special drives where space and weight limitations are critical. They can transmit up to three times the horsepower of conventional V-belts in the same drive space. In many cases, they can replace high maintenance chain and gear drives.
- Vextra® construction that eliminates the stretch or elongation problems associated with most V-belts, and increases belt service life by 33%.
- Reduce weight and overhung load on bearings.
- Sheaves can be smaller in diameter and operate at belt speeds up to 6,500 fpm without dynamic balancing.
- Special material that resists oil, heat, sunlight, ozone, weathering and aging.
- Special tensile cords treated with a material that bonds with the cords and surrounding rubber.
- Meets or exceeds Rubber Manufacturer’s Association standards for static conductivity.
Additional Resources Belt Identification Guide
|
|