|
SPECTRA PREMIUM GMP109A
|
|
$33.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$33.79
Total
|
|
|
|
|
|
| SPECTRA PREMIUM GMP109A Specifications |
|---|
| Length (IN) | 16-5/8 | | Width (IN) | 11-15/16 | | Depth (IN) | 5-1/2 | | Capacity (L) | 4.8 | | Cooler Retainer Fitting | No | | Finish | Bare Aluminum | | Color | Silver | | Plug Included | Yes | | Material | Aluminum Casting | | Gaskets Included | No | | Bolt Hole Quantity | 17 | | Sump Style | Wet | | Sump Location | Center | | Baffled | Yes | | Kicked Out | No | | Dipstick Port | No | | Windage Tray Included | No | | Pick Up Included | No | | Crankshaft Wiper Included | No | | Install Hardware Included | No | | Drain Plug Thread Size | M14 x 1.5 | | Height (IN) | 5-13/16 | | With Crank | No | | Oil Level Sensor Port | No | | Gasket or Silicone sealing | Silicone |
|
|
| Gasket and/or Sealant Not Included |
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
- Unit is designed to OE fit, form and function requirements accomplished by leveraging Spectra's OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Road tested to ensure real world performance and to verify that each design meets high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
- Addition of threaded stainless steel inserts in aluminum pans to increase product lifespan by providing increased durability while maintaining the OE drain plug specifications
Installation
Technical Notice
Attention California Customers - Y
|
| OEM / Interchange Numbers: 24403408 |
SPECTRA PREMIUM Warranty Information:Limited Lifetime - Radiator Fan Motors, Radiator Fan Assemblies, Radiator Fan Blades, Emission Hoses, Mass Air Flow Sensors, Diesel Emissions Fluid Heaters, Exhaust parts, Fuel Pump Strainers, Fuel Pump Pulsators, Fuel Pump part numbers SP*, Throttle Bodies, Fuel Pump Push Rods, Fuel Pump Drive Modules, Fuel Pump Hangers, A/C Condenser Fan Assemblies, Ignition Coils, Distributors, Camshaft Position Sensors, Crankshaft Position Sensors, Camshaft Synchronizers, Camshaft Synchronizer Alignment Kits.
36 months - Oil Sump Plates, Oil Pans, Fuel Tanks.
24 months - Radiators, Inverter Coolers, Turbochargers, Fuel Tank & Pump Assemblies, A/C Condensers, Condenser / Capacitors.
4 months - A/C Receiver Drier / Accumulators, A/C Receiver Drier Desiccant Elements.
12 months - all other parts. |
|
