The AXADBXH-CH1 harness is designed for, and must be used with, the AXADBX-1 or AXADBX-2 interface (sold separately). Please refer to the AXADBX-1 or AXADBX-2 for the 16-pin connector with stripped leads.
Provides accessory power (12-volt 10-amp)
Maintains the retained accessory power (R.A.P.) feature
Provides NAV outputs (parking brake, reverse, speed sense)
Pre-wired AXSWC harness (AXSWC sold separately)
Can be used in both amplified and non-amplified models
Retains balance and fade (To retain fade in amplified models, use the AXADBX-1)
Additional Resources