|
DORMAN 626739
|
|
$18.35
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$18.35
Total
|
|
|
|
|
|
| DORMAN 626739 Specifications |
|---|
| Axis 1 Length (IN) | 23.5 | | Axis 2 Length (IN) | 2.5 | | Branch Quantity | 2 | | Burst Pressure (PS) | 75 | | Centerline Length (IN) | 26 | | Clamps Included | Yes | | Contains Spring | No | | Coolant Hose Heat Shield Included | No | | Coolant Hose Type | Single I.D. (Inside Diameter) | | End 1 Attachment Type | Hose | | End 1 Inside Diameter (IN) | 0.7 | | End 1 Type | Hose | | End 2 Attachment Type | Quick Disconnect | | End 2 Inside Diameter (IN) | 0.52 | | End 2 Type | Quick Disconnect | | End 3 Attachment Type | Quick Disconnect | | End 3 Inside Diameter (IN) | 0.23 | | Hose Attachment End 1 | Hose | | Hose Attachment End 2 | Quick Disconnect | | Hose End (1) Outside Diameter (IN) | 1 in | | Hose End (2) Outside Diameter (IN) | 0.69 IN | | Hose End (3) Outside Diameter (IN) | 0.36 IN | | Hose Material | Metal; Plastic; Rubber | | Hose Outside Diameter | 0.95 IN | | Hose Overall Length (IN) | 23.5 | | Hose Shape | Molded Assembly | | Inside Diameter | 0.73 IN | | Length | 23.5 IN | | Maximum Bend Angle | 180 | | Maximum Working Pressure (PS) | 100 | | Mounting Bracket Included | No | | Outside Diameter | 0.95 IN | | Package Contents | 1 Heater Hose Assembly | | Protective Sleeve Attached | Yes | | Thermostatically Controlled | No |
|
|
Don't get stuck with an overheated engine due to a failed heater hose tube. The solid plastic or metal construction that define so many Dorman products makes Dorman's HVAC tubes robust and reliable. Features & Benefits:- Direct replacement for a perfect fit every time
- All hardware included (where applicable)
- Easy to install
- Made of improved materials to address known failure points
 Signs it is Time to Replace Your Heater Hose(s) Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Heater Hose damage / failure:
| INTERNAL DAMAGE |
|
Soft / mushy hose ends, usually about 2 inches from the clamp.
 Internally Damaged Hose |
| LEAKAGE |
|
Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.
 Leaking Hose |
| HEAT DAMAGE |
|
Slight swelling, or a hardened, glossy cover that is covered with cracks.
 Heat Damaged Hose |
| OZONE DAMAGE |
|
Tiny, parallel cracks in the cover, usually at hose bends.
 Ozone Damaged Hose |
| ABRASION DAMAGE |
|
Rubbing marks on, or damage to the hose cover.
 Abrasion Damaged Hose |
| OIL CONTAMINATION |
|
Soft or spongy to the touch - bulges and swelling are readily apparent.
 Oil Contaminated Hose |
|
| OEM / Interchange Numbers: 6E5Z18K359A |
|
