MOOG
More Information for MOOG 374
Continue Shopping
 
MOOG 374  
$30.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$30.79
Total
MOOG 374close
<
>
Part image
MOOG 374 Specifications
Bearing Cap Axis 1 Diameter1.375 in
Bearing Cap Axis 1 Diameter35 mm
Bearing Cap Axis 2 Diameter1.375 in
Bearing Cap Axis 2 Diameter35 mm
Bearing Cap Type4 Grooved Round Bearings
Bearing Type ARound Grooved
Bearing Type BRound Grooved
GreaseableYes
Length Axis 13 IN
Length Axis 176.2 mm
Length Axis 23 IN
Length Axis 276.2 mm
Length Measurement AOutside of Groove to Outside of Groove
Length Measurement BInside of Groove to Inside of Groove plus thickness of 2 Lock Rings
Lube Fitting LocationRegular Lube Fitting in Cross
OE SeriesSpicer 1480-WJ (SPL55)
Part DescriptionUniversal Joint
U-Joint Identification4 Grooved Round Bearings
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

Features & Benefits:
  • Cross body drilled and tapped with grease fitting to allow joint maintenance
  • Patented thrust washer technology absorbs axial loads preventing metal to metal contact
  • Exclusive anti-drainback design controls lubrication flow and prevents dry startup
  • OE needle bearings ensure size consistency, proper hardness and strength
  • Metal shielded nitrile rubber grease seals have compressed double lip design
  • Consistent heat treatment achieves good bearing hardness for durable wear and strength
Which Universal Joint Is Right For You?

Drive Conditions
Type Normal City / Highway Dirty / Dusty Extreme Weather Heavy Towing Off-Road / Racing
Economy
Check Mark Icon
Standard Replacement
Check Mark Icon Check Mark Icon
Heavy Duty Check Mark Icon Check Mark Icon Check Mark Icon Check Mark Icon Check Mark Icon

Greasable vs. Non-Greasable

While non-greasable universal joints were once considered an upgrade over greasable universal joints, the differences in strength and durability are negligible today. Advancements in technology mean either option is a great choice, but there are some key pros and cons to consider:

NON-GREASABLE
  • Pros: Non-Greasable U-Joints do not need to be serviced regularly. After installation, these U-Joints require little upkeep and primarily need to be monitored for signs of failure.
  • Cons: Since these U-Joints cannot be re-greased, the entire U-Joint must be replaced at the first sign of wear / noise as to not risk failure.
GREASABLE
  • Pros: Greasable U-Joints are serviceable and contaminants can be flushed out easily. Regular maintenance and greasing also means you'll be more in tune with the wear status of the joints.
  • Cons: These U-Joints need to be checked and greased regularly. If this sounds unfavorable or if you're forgetful, non-greasable may be a better choice.
Preventative Maintenance Tips

The key to maximizing the performance and durability of any universal joint - as well as related parts such as drive shafts - is preventative maintenance. Universal joints are designed to last the life of the vehicle, but can wear down or break if neglected or overloaded. Follow these tips to avoid premature failure of your vehicle's drivetrain:

  • If a greasable universal joint is installed, periodically check them to ensure they are properly greased (at the very least, at every oil change).
  • Inspect the yokes that hold your universal joints for cracks, stress marks, or worn or damaged seal mating surfaces, and replace them if any of these are present.
  • Check your seals for signs of leakage, and replace them if leaks are present.
  • Periodically check for drive shaft play, which is an indication that a universal joint or seal has failed and needs to be replaced.
  • Inspect drive shafts for cracks, stress marks, dents, or bends, and replace them if any of these are present.
OEM / Interchange Numbers: 2AMGR004AB, 5C3Z3249AA, 6C3Z3249A

Warranty Information:
Limited Lifetime