The AXADBXH-FD2 harness is designed for, and must be used with, the AXADBX-1 or AXADBX-2 interface (sold separately) . Please refer to the AXADBX-1 or AXADBX-2 for the 16-pin connector with stripped leads.
Provides accessory power (12-volt 10-amp)
Maintains the retained accessory power (R.A.P.) feature
Provides NAV outputs (parking brake, reverse, speed sense)
Retains SYNC
Retains the factory AUX-IN jack
Pre-wired AXSWC harness (AXSWC sold separately)
Designed for non-amplified models
Retains balance and fade
Micro-B USB updatable
Additional Resources
Product Information Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov