WAI GLOBAL
More Information for WAI GLOBAL MAF20380
Continue Shopping
 
WAI GLOBAL MAF20380  
Out of Stock
Price
Core
Pack
Total
Sensor Only
WAI Global Mass Air Flow Sensors are manufactured and tested with OEM equipment to OEM standards.

Features:
  • 100% New
  • Outperforms competition when tested in extreme environmental conditions (-40 °F to 250°F)
  • Quality certified with ISO 9001, TS 16949 & ISO 14001
Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

  • Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
  • Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
    • Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
  • Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
  • Cracked Intake Boot (found in the "Engine" category)
Videos

Cleaning Your MAF Sensor

Additional Resources

RockAuto Newsletter: Maintaining the Optimal Air/Fuel Mixture

Warranty Information:
Limited Lifetime